3Com WX1200 3CRWX120695A Configuration Manual page 243

Configuring MAPs 243
To change the RTS threshold, use the following command:
set radio-profile name rts-threshold threshold
The threshold can be a value from 256 bytes through 3000 bytes. The
default is 2346.
To change the RTS threshold for radio profile rp1 to 1500 bytes, type the
following command:
WX1200# set radio-profile rp1 rts-threshold 1500
success: change accepted.
Changing the Fragmentation Threshold The fragmentation
threshold specifies the longest a frame can be without being fragmented
into multiple frames by a radio before transmission. To change the
fragmentation threshold, use the following command:
set radio-profile name frag-threshold threshold
The threshold can be a value from 256 through 2346. The default is
2346.
To change the fragmentation threshold for radio profile rp1 to 1500
bytes, type the following command:
WX1200# set radio-profile rp1 frag-threshold 1500
success: change accepted.
Changing the Maximum Receive Threshold The maximum receive
threshold specifies the number of milliseconds a frame received by a radio
can remain in buffer memory. To change the maximum receive lifetime,
use the following command:
set radio-profile name max-rx-lifetime time
The time can be from 500 ms (0.5 second) through 250,000 ms
(250 seconds). The default is 2000 ms (2 seconds).
To change the maximum receive threshold for radio profile rp1 to
4000 ms, type the following command:
WX1200# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.