Adding An Entry To The Forwarding Database; Removing Entries From The Forwarding Database - 3Com WX1200 3CRWX120695A Configuration Manual

98 C 5: C
HAPTER ONFIGURING AND
WX1200# display fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS]
---- ---- ------------------ -----
1 00:01:97:13:0b:1f
1 00:0b:0e:02:76:f5
Total Matching FDB Entries Displayed = 2
Adding an Entry to
the Forwarding
Database
Removing Entries
from the Forwarding
Database
M P
ANAGING ORTS AND
To display all entries that begin with 00, type the following command:
(For information about the fields in the output, see the
Switch and Controller Command
To add an entry to the forwarding database, use the following command:
set fdb {perm | static} mac-addr port port-list vlan vlan-id
[tag tag-value]
To add a permanent entry for MAC address 00:bb:cc:dd:ee:ff on ports 3
and 5 in VLAN blue, type the following command:
WX1200# set fdb perm 00:bb:cc:dd:ee:ff port 3,5 vlan blue
success: change accepted.
To add a static entry for MAC address 00:2b:3c:4d:5e:6f on port 1 in the
default VLAN, type the following command:
WX1200# set fdb static 00:2b:3c:4d:5e:6f port 1 vlan default
success: change accepted.
To remove an entry from the forwarding database, use the following
command:
clear fdb {perm | static | dynamic | port port-list}
[vlan vlan-id] [tag tag-value]
To clear all dynamic forwarding database entries that match all VLANs,
type the following command:
WX1200# clear fdb dynamic
success: change accepted.
To clear all dynamic forwarding database entries that match ports 3 and
5, type the following command:
WX1200# clear fdb port 3,5
success: change accepted.
VLAN
S
Destination Ports
-----------------------------------------
1
1
Reference.)
[Protocol Type]
[ALL]
[ALL]
Wireless LAN