Assigning Attributes To Users And Groups - 3Com WX1200 3CRWX120695A Configuration Manual

492 C 21: C
HAPTER ONFIGURING
Assigning Attributes
to Users and Groups
AAA N U
FOR ETWORK SERS
Table 43 Authentication Attributes for Local Users (continued)
Attribute Description
url URL to which the user
is redirected after
(network access
successful WebAAA.
mode only)
vlan-name Virtual LAN (VLAN)
assignment.
(network access
mode only) Note: On some
RADIUS servers, you
might need to use the
standard RADIUS
attribute
Tunnel-Pvt-Group-ID,
instead of VLAN-Name.
You can assign authorization attributes to individual users or groups of
users. Use any of the following commands to assign an attribute to a user
or group in the local WX database and specify its value:
set user username attr attribute-name value
set usergroup group-name attr attribute-name value
set mac-user mac-addr attr attribute-name value
set mac-usergroup group-name attr attribute-name value
If attributes are configured for a user and also for the group the user is in,
the attributes assigned to the individual user take precedence for that
user. For example, if the start-date attribute configured for a user is
sooner than the start-date configured for the user group the user is in,
the user's network access can begin as soon as the user start-date. The
user does not need to wait for the user group's start date.
Valid Value(s)
Web URL, in standard format. For
example:
http://www.example.com
Note: You must include the http://
portion.
You can dynamically include any of
the variables in the URL string:
$u—Username
$v—VLAN
$s—SSID
$p—Service profile name
To use the literal character $ or ?, use
the following:
$$
$q
Name of a VLAN that you want the
user to use. The VLAN must be
configured on a WX switch within the
Mobility Domain to which this WX
switch belongs.