Using Display Commands; Viewing Vlan Interfaces; Viewing Aaa Session Statistics - 3Com WX1200 3CRWX120695A Configuration Manual

Using display
Commands
Viewing VLAN
Interfaces
WX1200# display interface
VLAN Name
---- --------------- --------------- --------------- ------- -----
1 default
130 vlan-eng
190 vlan-wep
4094 web-aaa
Viewing AAA Session
Statistics
WX1200# display aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=5 key=(null) author-pass=(null)
Radius Servers
Server
-------------------------------------------------------------------
SQA2BServer
SideShow
Server groups
sg1: SideShow
SQA: SQA2BServer
set authentication dot1x *@xmpl.com pass-through sg1
set authentication dot1x *@xmpl.com pass-through SQA
set authentication dot1x EXAMPLE\* peap-mschapv2 sg1
user sqa
password = 08325d4f (encrypted)
session-timeout = 3600
mac-user 00:00:a6:47:ad:03
session-timeout = 3600
vlan-name = vlan-wep
mac-user 00:00:65:16:0d:69
session-timeout = 3600
vlan-name = vlan-eng
To troubleshoot the WX switch, you can use display commands to
display information about different areas of the MSS. The following
commands can provide helpful information if you are experiencing MSS
performance issues.
To view interface information for VLANs, type the following command:
Address
0.0.0.0
192.168.12.7
192.168.19.7
10.10.10.1
(For more information about VLAN interfaces, see "Configuring and
Managing VLANs" on page 87.)
To view AAA session statistics, type the following command:
Addr
11.1.1.11
192.168.0.21
Mask Enabled State
0.0.0.0 NO
255.255.255.0 YES
255.255.255.0 YES
255.255.255.0 YES
Ports T/o Tries Dead State
1812 1813 5 3
1812 1813 5 3

Using display Commands

Down
Up
Up
Up
5 UP
0 UP
635