3Com WX1200 3CRWX120695A Configuration Manual page 308

308 C 13: C
HAPTER ONFIGURING
WX1200# display service-profile sp1
ssid-name:
Beacon:
DHCP restrict:
Short retry limit:
Auth fallthru:
Enforce SODA checks:
Custom success web-page:
Custom logout web-page:
Static COS:
CAC mode:
User idle timeout:
Keep initial vlan:
Web Portal ACL:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
U E
SER NCRYPTION
10 Configure a passphrase for the preshared key. Type the following
command:
WX1200# set service-profile wpa-wep-for-mac psk-phrase
"passphrase to convert into a preshared key"
success: change accepted.
11 Display the WPA configuration changes. Type the following command:
12 Map service profile wpa-wep-for-mac to radio profile rp3. Type the
following commands:
WX1200# set radio-profile rp3 service-profile wpa-wep-for-mac
success: change accepted.
13 Apply radio profile rp3 to radio 1 on port 4 and to radios 1 and 2 on port
6 and enable the radios, and verify the configuration changes. Type the
following commands:
WX1200# set ap 4,6 radio 1 radio-profile rp3 mode enable
success: change accepted.
WX1200# set ap 6 radio 2 radio-profile rp3 mode enable
success: change accepted.
voice ssid-type:
yes Proxy ARP:
no No broadcast:
5 Long retry limit:
none Sygate On-Demand (SODA):
yes SODA remediation ACL:
Custom failure web-page:
Custom agent-directory:
no COS:
none CAC sessions:
180 Idle client probing:
no Web Portal Session Timeout:
<none> WEP Key 2 value:
<none> WEP Key 4 value:
1 WEP Multicast Index:
NO
crypto
no
no
5
no
0
14
yes
5
<none>
<none>
1