Testing Telephones And Other Equipment; Task List: Perform Acceptance Tests; Make Test Calls - Avaya S8700 Manual

196
Installing the S8700 IP Connect
2 Select the data sets and the backup method.
3 Click Start Backup to begin the back up process.

Testing Telephones and Other Equipment

This section describes how to test the telephones and other equipment. Perform these tests after
the equipment has been wired to the media gateway and after the customer's data for that
equipment has been administered. The tests are acceptance tests and provide some assurance
that the Avaya S8700 Media Server for IP Connect Configuration will perform properly after
installation and administration.
If problems occur or more extensive tests are required, refer to the maintenance book for your
configuration

Task List: Perform Acceptance Tests

''Make Test Calls'' on page 196
1
''Test 302C Attendant Console'' on page 197
2
3 ''Test Selector Console'' on page 197
''Test External Ringing'' on page 197
4
5 ''Test Queue Warning Indicator'' on page 198
''Test Integrated Announcement'' on page 198
6
''Record Announcement'' on page 198
7
8 ''Playback Announcement'' on page 198
''Delete Announcement'' on page 198
9
10 ''Test Music-on-Hold'' on page 198
''Test Emergency Transfer (S8700 Multi-Connect only)'' on page 198
11
''Test Remote Access Interface'' on page 199
12
13 ''Test Terminating Trunk Transmission'' on page 199
''Test the C-LAN Connectivity'' on page 200
14
15 ''Test Stratum 3 Clock (if used—S8700 Multi-Connect only)'' on page 200
16 ''Resolve Alarms'' on page 201

Make Test Calls

Make 2 calls from 1 telephone to another telephone. Make the first call by dialing a telephone
and make the second call by dialing a trunk access code and a Listed Directory Number (LDN).
.
May 2002
and ''Resolve Alarms'' on page 201