Using Windows online diagnostic tools
Parameter
To run the nbtstat command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type nbtstat with the required parameters.
3. Press Enter.
4. Type Exit to exit the Command Prompt window and return to Windows.
The netstat command
The netstat command displays current TCP/IP network connections and protocol statistics.
Netstat command syntax
The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
netstat command parameters
Table 14: netstat command parameters
Parameter
-a
-e
-n
-s
40
Avaya CallPilot® 600r Server Maintenance and Diagnostics
this parameter, nbtstat prints the current configuration
information once.
Result: The Command Prompt window appears.
Result: The system runs the nbtstat utility.
Displays all connections and listening ports.
Displays Ethernet statistics. You can combine this with the -s
option.
Displays addresses and port numbers in numeric form.
Displays statistics for each protocol.
Description
Description
December 2010