Job Aid: Replacing The Compactflash Reader And Card; Required Equipment; Removing The Old Card Reader; Replacing The Card Reader - Avaya S8300 Series Replacement Manual

Job aids for field replacements (frus) with the g700 media gateway
Hide thumbs Also See for S8300 Series:
Table of Contents

Advertisement

Job Aid: Replacing the CompactFlash reader and
card
Note:
This Job Aid applies to the Avaya S8300C and S8300D Servers.
Note:
!
Important:
Always check the Avaya Support Website for Product Correction Notices at
Important:
/support.avaya.com
products) in the MOST POPULAR PRODUCTS IN SUPPORT section.

Required equipment

Verify that you have the following equipment:
Replacement Avaya approved CompactFlash Drive (card reader)

Removing the old card reader

To remove the old or defective CompactFlash card reader:
1. Remove the USB connection for the reader from the USB port on the server.
2. Do not re-use the reader cable.

Replacing the card reader

To replace the CompactFlash card drive:
1. Connect the USB cable from the card drive to the USB port on the server.
and select Product Correction Notices (All Avaya
03-300528 Issue 5 May 2009
http:/
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8300cS8300dS8300aS8300b

Table of Contents