Suzuki SY413 Service Manual page 3033

1. Sub muffler
2. Mounting
3. Three-way catalytic converter case
1. Fuel pump and level
gauge coupler
2. Clamp
3. Grommet
7) Install propeller shaft referring to SECTION 4B (4WD only).
8) Install muffler and tighten nut to specified torque.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
9) Connect fuel pump and level gauge coupler and install grom-
met securely.
10) Install right rear door opening trim, right front partition trim,
right side sill scuff, rear seat back and rear seat cushion.
11) Connect negative cable at battery.
12) With engine "OFF" and ignition switch "ON", check for fuel
leaks.
13) Start engine and check each join of exhaust system for leak-
age.
ENGINE FUEL 6C-9