Toyota Tundra 2005 Service - Repair - Maintenance page 3247

Claw
2 Clips
Clip
BODY - ROOF HEADLINING (Double Cab)
REMOVAL
HINT:
z
A bolt without a torque specification is shown in the stan-
dard bolt chart (see page
1. REMOVE FRONT DOOR SCUFF PLATE LH
(a) Remove the 4 screws.
(b) Using a screwdriver, disengage the claw and remove the
scuff plate.
HINT:
H24383
Tape the screwdriver tip before use.
2. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.
3. REMOVE COWL SIDE TRIM BOARD LH
(a) Remove the nut, 2 clips and cowl side trim board.
4. REMOVE COWL SIDE TRIM BOARD RH
HINT:
Use the same procedures described for the LH side.
5. REMOVE FRONT DOOR OPENING TRIM WEATH-
ERSTRIP LH
6. REMOVE FRONT DOOR OPENING TRIM WEATH-
ERSTRIP RH
H16716
7. REMOVE FRONT PILLAR GARNISH LH
(a) Remove the assist grip.
(1) Using a screwdriver, remove the 2 assist grip plugs.
HINT:
Tape the screwdriver tip before use.
(2) Remove the 2 screws and assist grip.
(b) Remove the front pillar garnish.
(c) Use the same manner described above to the other side.
8. REMOVE FRONT PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.
H16717
SS-2 ).
Author : Date :
BO-133
BO4QH-03
4904