User Login - Supermicro SSE-G48-TG4 Configuration Manual

User name and password
•
Enable password
•
Authorized managers
•
Defaults – Management Access
Parameter
User Name/Password/Privilege
Privilege (for configured users)
Enable Password
IP Authorized Managers

1.2.1 User Login

User accounts can be configured for switch access. Each username can be associated with a password
and a privilege level. Users configured with a password are authenticated to the configured privilege
level while accessing the switch.
Users with a privilege level 1 or above can execute all "show" commands. To execute configuration
commands, access with privilege level 15 is required.
Follow the steps below to configure the username.
Step Command
Step 1 configure terminal
Step 2 username <user-name> [password <passwd>]
[privilege <1-15>]
Step 3 end
Step 4 list users
show users
Default Value
ADMIN/ADMIN/15
stackuser/stack123/1
1
ADMIN
None
Supermicro L2/L3 Switches Configuration Guide
Description
Enters the configuration mode.
Configures the username
password.
user-name–Alphanumeric
character length of 1-20
password – Alphanumeric with a
character length of 1-20
privilege - Specify 1-15 for any of the
privilege levels
Exits the configuration mode.
Displays the users available in the
switch.
Displays the users that are currently
logged in.
and
with a
10