Filters; Unicast Filters; Multicast Filters - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-62. Local Authentication Server Configuration Page Parameters (Continued)
Parameter
Permission
Port List
Parameter
Session Intialize
Session
ReAuthenticate

Filters

The Filters link allows you to configure Layer 2 packet filtering.
The Layer 2 packet filtering management has the following configuration pages:
•

Unicast Filters

•

Multicast Filters

Description
This parameter represents the allowance and denial of access. The values that
can be configured are:
• Allow - When set to Allow, the authentication request is allowed over the set
of ports in the P
ORT
• Deny - When set to Deny, the authentication request is NOT allowed over
the set of ports in the P
This parameter represents the complete set of ports of the authenticator to which
the user is allowed or denied access. It is based on permission.
Table 5-63. MAC Session Info Page Parameters
Description
This parameter is the initialization control for this Supplicant MAC address.
Setting this attribute to True causes the Supplicant session with this MAC
address, to be initialized. The attribute value reverts to False once initialization
has completed.
This parameter is the reauthentication control for this Supplicant MAC address.
Setting this attribute to True causes the Authenticator PAE state machine for this
MAC address to reauthenticate the Supplicant. Setting this attribute to False has
no effect. This attribute always returns to False when it is read.
L .
IST
L .
ORT IST
5-102