Installing An Mx960 As Mlc; Figure 106: Connecting Dc Power To The Mx960 Router - Juniper MX960 Hardware Manual

Related
Documentation

Installing an MX960 AS MLC

Copyright © 2017, Juniper Networks, Inc.

Figure 106: Connecting DC Power to the MX960 Router

Preventing Electrostatic Discharge Damage to an MX960 Router
MX960 DC Power Supply on page 104
MX960 DC Power Electrical Safety Guidelines
Removing an MX960 DC Power Supply on page 395
Connecting an MX960 DC Power Supply Cable on page 244
Disconnecting an MX960 DC Power Supply Cable on page 405
You can install up to eight Application Services Modular Line Cards (AS MLCs) vertically
in the front of the MX960 router. The AS MLCs are hot-insertable and hot-removable.
An empty AS MLC weighs 10.5 lb (4.76 kg). A fully configured AS MLC can weigh up to
15.27 lb (6.93 kg). Be prepared to accept its full weight.
To install an AS MLC (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Place the AS MLC on an antistatic mat.
2.
Figure 107 on page 299):
Chapter 21: Installing Components
297