MX960 3D Universal Edge Router Hardware Guide
Related
Documentation
Replacing the MX960 Cable Manager
310
Figure 114: Alarm Relay Contacts
Preventing Electrostatic Discharge Damage to an MX960 Router
MX960 Craft Interface Overview on page 15
MX960 Craft Interface Serial Number Label on page 511
To remove the standard cable manager (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Using a 7/16-in. (11 mm) nut driver, unscrew the nuts on the corners of the standard
2.
cable manager.
Grasp the bottom of the standard cable manager, and pull it straight out from the
3.
studs on the front of the chassis.
Figure 115 on page
311):
Copyright © 2017, Juniper Networks, Inc.