Replacing Power System Components; Replacing An Mx960 Ac Power Supply; Removing A Normal Capacity Mx960 Ac Power Supply - Juniper MX960 Hardware Manual

CHAPTER 26

Replacing Power System Components

Replacing an MX960 AC Power Supply

Removing a Normal Capacity MX960 AC Power Supply

Copyright © 2017, Juniper Networks, Inc.
Replacing an MX960 AC Power Supply on page 391
Replacing an MX960 DC Power Supply on page 395
Replacing an MX960 AC Power Supply Cord on page 403
Replacing an MX960 DC Power Supply Cable on page 404
Removing a Normal Capacity MX960 AC Power Supply on page 391
1.
Installing an MX960 AC Power Supply on page 394
2.
Before you remove a power supply, be aware of the following:
NOTE: The minimum number of power supplies must be present in the router
at all times.
CAUTION: To maintain proper cooling and prevent thermal shutdown of the
operating power supply unit, each power supply slot must contain either a
power supply or a blank panel. If you remove a power supply, you must install
a replacement power supply or a blank panel shortly after the removal.
NOTE: After powering off a power supply, wait at least 60 seconds before
turning it back on.
391