Copyright © 2017, Juniper Networks, Inc.
Locate the slot in the DPC card cage in which you plan to install the DPC.
4.
Ensure that the DPC is right-side up, with the text on the faceplate of the DPC facing
5.
upward.
Lift the DPC into place, and carefully align first the bottom, then the top of the DPC
6.
with the guides inside the card cage.
Slide the DPC all the way into the card cage until you feel resistance.
7.
Grasp both ejector handles, and rotate them simultaneously clockwise until the DPC
8.
is fully seated.
Figure 67: Installing a DPC
Chapter 16: Installing the MX960 Router
221