Copyright © 2017, Juniper Networks, Inc.
After you remove each modular card, immediately place it on an antistatic mat or in
8.
an electrostatic bag.
If you are not reinstalling an AS MLC into the emptied slots within a short time, install
9.
a blank AS MLC panel over each slot to maintain proper airflow in the card cage.
CAUTION:
After removing an AS MLC from the chassis, wait at least 30
seconds before reinserting it or inserting an AS MLC into a different slot.
Figure 119: Removing an AS MLC
Chapter 22: Replacing Chassis Components
315