Mx960 Dpc And Mpc Leds On The Craft Interface; Mx960 Fpc Leds On The Craft Interface; Mx960 Scb Leds On The Craft Interface; Table 9: Dpc And Mpc Leds On The Craft Interface - Juniper MX960 Hardware Manual

MX960 3D Universal Edge Router Hardware Guide

MX960 DPC and MPC LEDs on the Craft Interface

MX960 FPC LEDs on the Craft Interface

MX960 SCB LEDs on the Craft Interface

18
Each DPC or MPC has LEDs on the craft interface that indicate its status. The LEDs,
labeled 0 through 5 , 2/6 , and
interface. Slot is for an additional DPC, FPC, MPC, or SCB.
2/6
the functions of the LEDs.

Table 9: DPC and MPC LEDs on the Craft Interface

Label Color
OK Green
–
Red
FAIL
An FPC takes up two DPC slots when installed in an MX Series router. The LEDs, labeled
0 through 5 , 2/6 , and 7 through
Slot is for an additional DPC, FPC, MPC, or SCB. The LED corresponds to the lowest
2/6
DPC slot number in which the FPC is installed.
of the FPC LEDs.

Table 10: FPC LEDs on the Craft Interface

Label Color
OK Green
–
Red
FAIL
Each SCB has two LEDs on the craft interface that indicates its status. The SCB LEDs,
labeled 0 , 1 , and 2/6 , are located along the bottom of the craft interface.
Table 11 on page 19 describes the functions of the SCB LEDs.
7 through 11 , are located along the bottom of the craft
State Description
On steadily Card is functioning normally.
Blinking Card is transitioning online or offline.
Off The slot is not online.
On steadily Card has failed.
11 , are located along the bottom of the craft interface.
Table 10 on page 18
State Description
On steadily FPC is functioning normally.
Blinking FPC is transitioning online or offline.
Off The slot is not online.
On steadily FPC has failed.
Table 9 on page 18 describes
describes the functions
Copyright © 2017, Juniper Networks, Inc.