Replacing An Sfp Or Xfp Transceiver On An Mx960 Dpc, Mpc, Mic, Or Pic; Removing An Sfp Or Xfp Transceiver From An Mx960 Dpc, Mpc, Mic, Or Pic - Juniper MX960 Hardware Manual

Related
Documentation

Replacing an SFP or XFP Transceiver on an MX960 DPC, MPC, MIC, or PIC

Removing an SFP or XFP Transceiver from an MX960 DPC, MPC, MIC, or PIC

Copyright © 2017, Juniper Networks, Inc.
Verify that the major alarms are displayed by issuing the
8.
command:
user@host> show chassis alarms
Alarm Time Class Description
2011-06-01 13:37:43 EDT Minor Require a fan tray upgrade
2011-06-01 13:37:26 EDT Minor Backup RE Active
The major alarms are not displayed anymore, and the upgrade is successfully
completed.
Disable the upgrade configuration by issuing the
9.
command and then the
You can delete that command by issuing the
10.
and then the command.
commit
Verify the SCBs before you finish by issuing the
11.
user@host> show chassis hardware
Item Version Part Number Serial Number Description
CB0 REV 02 750-031391 YE8505
CB1 REV 07 710-031391 YL6769
CB2 REV 07 710-031391 YE8492
You can see that the MX960 now has MX SCBEs.
Removing an MX960 SCB on page 410
Installing an MX960 SCB on page 302
Small form-factor pluggable (SFPs) and XFPs are optical transceivers that are installed
in a DPC or PIC. SFPs and XFPs are hot-insertable and hot-removable.
Removing an SFP or XFP Transceiver from an MX960 DPC, MPC, MIC, or PIC on page 437
1.
Installing an SFP or XFP Transceiver into an MX960 DPC, MPC, MIC, or PIC on page 439
2.
Removing an SFP or XFP does not interrupt DPC, MPC, MIC, or PIC functioning, but the
removed SFP or XFP no longer receives or transmits data.
Chapter 27: Replacing Switch Fabric Components
set chassis state cb-upgrade off
commit command.
delete chassis state cb-upgrade
show chassis hardware
Enhanced MX SCB
Enhanced MX SCB
Enhanced MX SCB
show chassis alarms
command
command:
437