Upgrading An Mx960 Scb To Scbe; Preparing For The Upgrade; Figure 170: Installing An Scb - Juniper MX960 Hardware Manual

Upgrading an MX960 SCB to SCBE

Copyright © 2017, Juniper Networks, Inc.

Figure 170: Installing an SCB

Preparing for the Upgrade on page 413
1.
Upgrading the First SCB on page 415
2.
3. Upgrading the SCB in the Backup Routing Engine on page 416
Upgrading the SCB in the Master Routing Engine on page 418
4.
Completing the SCB Upgrade on page 420
5.

Preparing for the Upgrade

NOTE: This topic describes the in-service upgrade of the SCB to SCBE, that
is, without taking the router offline. You can perform the in-service upgrade
only when the line cards installed in the MX960 are of type DPC, MS-DPC,
MPC1, MPC2, or MPC3. If other type of line cards are installed, ensure that
you take the router offline before you perform the SCB to SCBE upgrade.
Chapter 27: Replacing Switch Fabric Components
413