Radiation And Laser Warnings; Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines; Class 1 Laser Product Warning - Juniper MX960 Hardware Manual

Related
Documentation

Radiation and Laser Warnings

Laser and LED Safety Guidelines and Warnings

Copyright © 2017, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 529
AC Power Electrical Safety Guidelines on page 552
DC Power Electrical Safety Guidelines for Switches
Laser and LED Safety Guidelines and Warnings on page 541
Radiation from Open Port Apertures Warning on page 543
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 541
Class 1 Laser Product Warning on page 541
Class 1 LED Product Warning on page 542
Laser Beam Warning on page 542

General Laser Safety Guidelines

When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.

Class 1 Laser Product Warning

WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Attention Produit laser de classe I.
Chapter 35: Safety and Compliance Information
541