Juniper MX960 Hardware Manual page 462

MX960 3D Universal Edge Router Hardware Guide
432
user@host> show chassis fabric summary
Plane State Uptime
2 Online 3 minutes, 45 seconds
3 Offline
Check if the State of Plane 3 is Offline.
Take the next fabric plane offline by issuing the
5.
command and verify that the fabric plane is offline by issuing the command in Step
4.
Take the SCB in slot 1 offline by issuing the
6.
Verify that the SCB is offline by issuing the
7.
user@host> show chassis environment cb 1
CB 1 status:
State Offline
Power 1 Disabled
Power 2 Disabled
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
8.
the strap to one of the ESD points on the chassis.
Remove and replace the offline SCB on the router with the SCBE.
9.
Verify that the installation is successful and the SCB is online by issuing the
10.
chassis environment cb 1
user@host> show chassis environment cb 1
CB 1 status
State Online
Temperature 30 degrees C / 86 degrees F
Other details, such as power, are also displayed along with the state.
Verify that the fabric planes 2 and 3 come online correctly by issuing the
11.
fabric summary command:
user@host> show chassis fabric summary
Plane State Uptime
2 Online 2 minutes, 5 seconds
3 Online 1 minutes, 55 seconds
Verify that the backup routing engine is back online by issuing the
12.
command:
routing-engine 1
user@host> show chassis routing-engine 1
Routing Engine Status:
Slot 1:
Current State Backup
request chassis fabric plane 2 offline
request chassis cb offline slot 1
show chassis environment cb 1
command:
command.
command:
show
show chassis
show chassis
Copyright © 2017, Juniper Networks, Inc.