MX SCBE Slots
MX SCBE Redundancy
MX SCBE Components
Copyright © 2017, Juniper Networks, Inc.
Figure 39: MX SCBE
SCBE-MX
You can install up to three MX SCBEs. The MX SCBEs install vertically into the front of
the chassis in the slots labeled
panel.
If three MX SCBEs are installed, the third MX SCBE functions as the backup.
Each MX SCBE consists of the following components:
I2C bus logic, used for low-level communication with each component
Component redundancy circuitry
Control Board/Routing Engine mastership mechanism
Gigabit Ethernet switch that is connected to the embedded CPU complex on all
components
External clock interface—Allows BITS or GPS clock source input to the centralized
timing circuit, or allows centralized timing to be output to BITS or GPS
Chapter 8: Switch Fabric Components and Descriptions
,
, and
. If any slots are empty, you must install a blank
0
1
2
111