Related
Documentation
Installing an MX960 Routing Engine
Copyright © 2017, Juniper Networks, Inc.
Figure 93: Installing a Lower Fan Tray
Preventing Electrostatic Discharge Damage to an MX960 Router
Removing an MX960 Fan Tray on page 327
Maintaining the MX960 Fan Trays on page 446
To install a Routing Engine into an SCB (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Ensure that the ejector handles are not in the locked position. If necessary, flip the
2.
ejector handles outward.
Place one hand underneath the Routing Engine to support it.
3.
Carefully align the sides of the Routing Engine with the guides inside the opening on
4.
the SCB.
Chapter 21: Installing Components
Figure 94 on page
270):
269