MX960 3D Universal Edge Router Hardware Guide
MX960 DC Power Supply
Table 57: Minimum Required Number of DC Power Supplies
Router Model
Configuration
MX960
High-capacity DC
MX960
Normal-capacity DC
104
In the DC power configuration, the router contains either two or four DC power supplies
(see
Figure 36 on page
104), located at the lower rear of the chassis in slots
through
(left to right). You can upgrade your DC power system from two to four
PEM3
power supplies. The DC power supplies in slots
lower fan tray, DPC slots
6
slots
and
provide power to the upper fan tray, DPC slots
PEM1
PEM3
SCB slot
0
.
Four power supplies provide full redundancy. If a DC power supply fails, its redundant
power supply takes over without interruption.
For existing power supplies, each DC power supply has a single DC input (–48 VDC and
return). For high-capacity power supplies, each DC power supply has two DC inputs (–48
VDC and return).
The minimum number of power supplies must be present in the router at all times. See
Table 57 on page 104
for the minimum required number of power supplies.
Minimum Required Number of Power
Supplies
One per zone x two zones = 2 power
supplies
2
Figure 36: DC Power Supply
PEM0
through
, and SCB slots
11
1
PEM0
and
PEM2
provide power to the
and
. The DC power supplies in
2
through
0
5
Model Number
PWR-MX960-4100-DC
PWR-MX960-DC
Copyright © 2017, Juniper Networks, Inc.
, and