Connector Pinouts For Mx Series Routing Engine Aux And Console; Ports; Table 72: Rj-45 Connector Pinout For The Aux And Console Ports - Juniper MX960 Hardware Manual

Related
Documentation
RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports
Copyright © 2017, Juniper Networks, Inc.
Table 71: RJ-45 Connector Pinout for the Routing Engine ETHERNET
Port (continued)
Pin Signal
4 Termination network
5 Termination network
6 RX–
7 Termination network
8 Termination network
MX960 Routing Engine Description on page 29
Replacing Connections to MX960 Routing Engine Interface Ports on page 343
Replacing an MX960 Routing Engine on page 333
The ports on the Routing Engine labeled
interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an
auxiliary or console management device.
connector pinout.

Table 72: RJ-45 Connector Pinout for the AUX and CONSOLE Ports

Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
8 CTS
Chapter 11: Pinout Specifications
AUX and CONSOLE are asynchronous serial
Table 72 on page 149 describes the RJ-45
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
149