Fine Line / Text Density Adjustment - Toshiba e-STUDIO2010AC Imaging Manual

3.Printer-specific Adjustments
3.1.6

Fine Line / Text Density Adjustment

You can suppress jaggies by increasing the density of thin lines and small text.
For 600 dpi, the density for all the contents for Image, the small text for Text and a thin line for Graphic
can be increased by the following codes.
• When adjusting Black mode, confirm that "1" is set for 05-7322.
• When adjusting Full color mode, confirm that "1" is set for 05-8102.
Color Original
PDL
mode
PS
(600 dpi)
PCL
Black
(600 dpi)
XPS
(600 dpi)
PS
(600 dpi)
PCL
Full color
(600 dpi)
XPS
(600 dpi)
For 1200 dpi, the density for the line for Graphic can be increased by the following code.
Color Original
PDL
mode
Black
PS
(1200 dpi)
Full color
Moreover, for 1200 dpi, the adjustment range of the line whose density is to be increased can be set.
Color
PDL
mode
Black
PS
(1200 dpi)
Full color
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Code Subcode
type
- 05-7340 -
- 05-7341 -
- 05-7342 -
General 0
05-8130
Line art 3
General 0
05-8131
Line art 3
General 0
05-8132
Line art 3
Code Subcode
type
0
- 05-8242
1
Code Subcode
Adjustment
0 range
lower limit
Adjustment
1 range
upper limit
05-8243
Adjustment
2 range
lower limit
Adjustment
3 range
upper limit
3-18
Recommended Acceptable
value value range
0 to 8
The larger the
Set a value value, the darker
larger than 0. the thin line or
small text
becomes.
Recommended Acceptable
value value range
Set a value
0 to 5
larger than 3.
The larger the value,
the darker the line
Set a value
becomes.
larger than 1.
Recommended Acceptable
value value range
0 to 255
-
When the lower limit
value is decreased, a
line with a lighter color
-
will become the target
for the adjustment.
When the upper limit
-
value is increased, a
line with a darker color
will become the target
-
for the adjustment.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Default
0
Default
3
1
Default
1
200
1
255