Configuring A Lag Interface; Prerequisites; Example Of Configuring A Lag Interface - Avaya 2330 Manual

Link aggregation configuration
Procedure steps
1. Enter configuration mode:
2. Enter the configuration context:
3. To reset the priority for the system to the default, enter:
Table 47: Variable definitions
<priority value>

Configuring a LAG interface

You can treat a LAG as an interface. You can configure a LAG as a Layer 3, access, trunk, or
hybrid interface.

Prerequisites

• You must have configured at least one LACP interface bundle (channel group).
Prerequisites
• You must have configured at least one LACP interface bundle (channel group).

Example of configuring a LAG interface

Procedure steps
1. To access configuration mode, enter:
2. To create a LAG, enter:
3. To configure the LAG interface as a Layer 2 interface, enter:
110 Configuration — Layer 2 Ethernet
configure terminal
lacp
no priority <priority value>
Variable
configure terminal
interface lag lag<id>
Comments? infodev@avaya.com
Value
The LACP system priority value currently
assigned to the system.
July 2013