Enabling Trunking On Wan Interfaces - Avaya 2330 Manual

Enabling trunking on WAN interfaces

You can configure trunking on WAN interfaces that are configured with PPP or FR
encapsulation.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To link the interface to the bundle, enter:
4. To configure the encapsulation for the bundle, enter:
5. To configure the interface as a Layer 2 interface, enter:
6. To configure the interface as a trunk, enter:
Table 39: Variable definitions
<bundle-name>
{ppp | fr}
<slot/port>
<type>
Configuration — Layer 2 Ethernet
configure terminal
interface bundle <bundle-name>
link <type> <slot/port>
encapsulation {ppp|fr}
switchport
switchport mode trunk
Variable
Configuring trunking on a WAN interface
Value
Specifies the name of the bundle. For
example, T1IF.
Specifies the encapsulation. You can
configure trunking only on WAN interfaces
that are configured with PPP or FR
encapsulation.
Specifies the slot and port numbers that
identify the port on which you enable a trunk.
For example, 7/1.
Specifies the type of WAN interface. For
example, t1. For detailed information on
WAN interfaces that support PPP or FR
encapsulation, see Avaya Secure Router
2330/4134 Configuration — WAN
interfaces (NN47263-500).
July 2013 89