Adding A Specified Vlan To A Hybrid Link; Removing A Specified Vlan From A Link; Disabling A Hybrid Link - Avaya 2330 Manual
Hide thumbs
Also See for 2330:
- Reference manual (446 pages) ,
- Regulatory information (72 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
Interface mode configuration
Adding a specified VLAN to a hybrid link
Use the procedure in this section to selectively add VLANs to a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To add a specific VLAN to the selected hybrid link, enter:
Removing a specified VLAN from a link
Use the procedure in this section to selectively remove VLANs from a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To remove a specific VLAN from the selected hybrid link, enter:
Disabling a hybrid link
Use the procedure in this section to disable a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To disable the hybrid link on the interface, enter:
98
Configuration — Layer 2 Ethernet
configure terminal
interface bundle <bundle-name>
switchport hybrid allowed vlan <vid> egress {tagged|untagged}
configure terminal
interface bundle <bundle-name>
switchport hybrid remove vlan <vid> egress {tagged|untagged}
configure terminal
interface bundle <bundle-name>
Comments? infodev@avaya.com
July 2013
Advertisement
Table of Contents
