Deleting VLAN classification rules
Use the procedure in this section to delete VLAN classification rules.
Procedure steps
1. To access configuration mode, enter:
2. Enter the configuration context:
3. To delete a subnet-based classification rule, enter:
4. To delete a protocol-based classification rule, enter:
Verifying VLAN classification rules
Use the procedure in this section to verify the successful operation of configured VLAN
classification rules.
Procedure steps
To verify the successful operation of VLAN classification rules, enter:
show running-config
Creating VLAN classification rules on an interface
Use the procedures in this section to create VLAN classification rules on an interface.
Important:
You can apply VLAN classification rules only on hybrid ports.
Configuration — Layer 2 Ethernet
configure terminal
vlan classification
no rule <id> ipv4 <ipaddr/netmask> vlan <vid>
no rule <id> protocol <protocol> encap <encapsulation>
Deleting VLAN classification rules
July 2013
123