Displaying Information Related To Cfm Stats - Avaya 2330 Manual

Ethernet Connectivity Fault Management configuration
Procedure steps
To display information about CC errors logged to the Secure Router 2330/4134 since
the reset or clear of a specific MEP, enter:
show cfm errors mep <mep id> md <WORD> ma <WORD>
Table 29: Variable definitions
<mep id>
md <WORD>
ma <WORD>

Displaying information related to CFM stats

Use the commands in this section to view information related to CFM statistics.
Procedure steps
1. To display stats for an MEP logged to the Secure Router 2330/4134 since a reset
2. To display stats for an MIP logged to the Secure Router 2330/4134 since a reset or
Table 30: Variable definitions
<mep id>
<mip id>
md <WORD>
ma <WORD>
74 Configuration — Layer 2 Ethernet
Variable
or clear, enter:
show cfm mep-stats [mep <mep id> md <WORD> ma <WORD>]
clear, enter:
show cfm mip-stats [md <WORD> mip <mip id>]
Variable
Comments? infodev@avaya.com
Value
The numerical identifier for the MEP. Values
are in the range from 1 to 8191.
The short name of the MD (up to eight
characters). For example
The short name of the MA (up to eight
characters). For example
Value
The numerical identifier for the MEP. Values
are in the range from 1 to 8191.
The numerical identifier for the MIP. Values
are in the range from 1 to 8191.
The short name of the MD (up to eight
characters). For example
The short name of the MA (up to eight
characters). For example
MD1 .
MA1 .
MD1
.
MA1 .
July 2013