Adding All Vlans To A Hybrid Link; Removing All Vlans From A Hybrid Link - Avaya 2330 Manual

<slot/port>
<type>

Adding all VLANs to a hybrid link

Use the procedure in this section to add all VLANs to a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To add all VLANs to the selected hybrid link, enter:

Removing all VLANs from a hybrid link

Use the procedure in this section to remove all VLANs from a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To remove all VLANs from the selected hybrid link, enter:
Configuration — Layer 2 Ethernet
Variable
configure terminal
interface bundle <bundle-name>
switchport hybrid allowed vlan all egress {tagged|untagged}
configure terminal
interface bundle <bundle-name>
switchport hybrid remove vlan all egress {tagged|untagged}
Configuring a hybrid link on a WAN interface
Value
Specifies the slot and port numbers that
identify the port on which you enable the
hybrid link. For example, 7/1.
Specifies the type of WAN interface. For
example, t1. For detailed information on
WAN interfaces that support PPP or FR
encapsulation, see Avaya Secure Router
2330/4134 Configuration — WAN
interfaces (NN47263-500).
July 2013 97