Multiple Spanning Tree Protocol configuration
Procedure job aid
Figure 20: Forward delay representation
Configuring maximum age time
The maximum age time represents the maximum age of the information after which the
information becomes stale. Use the procedures in this section to configure the maximum age
time.
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To configure the maximum age time value, enter:
Table 76: Variable definitions
<time value>
Restoring the default maximum age time
Use the procedure in this section to restore the maximum age time to the default setting (20
seconds).
154
Configuration — Layer 2 Ethernet
configure terminal
bridge
max-age <time value>
Variable
Comments? infodev@avaya.com
Value
The maximum age time, expressed in
seconds. The default value is 20 seconds.
Valid values are 6 to 40 seconds.
July 2013