Adding A Description To An Interface - Avaya 2330 Manual

Secure Router 2330/4134 Ethernet interfaces configuration
Table 36: Variable definitions
<string>
<slot/port>

Adding a description to an interface

Use the procedure in this section to configure a description for an Ethernet interface. With
Release 10.2 and later, the description string can be up to 76 characters.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To configure a description, enter:
Table 37: Variable definitions
<string>
<slot/port>
80 Configuration — Layer 2 Ethernet
Variable
configure terminal
interface ethernet <slot/port>
description <string>
Variable
Comments? infodev@avaya.com
Value
Specifies the comments. The string length
for comments is 80 characters. You must
enclose comments in quotation marks. For
example, REM_ "Configured on
July 30"
.
Specifies the slot and port numbers that
identify the port for configuration. For
example, 6/1.
Value
Specifies the description. The string length
for a description is 76 characters. You must
enclose the description in quotation marks.
description "Main
For example,
LAN" .
Specifies the slot and port numbers that
identify the port for configuration. For
example, 6/1.
July 2013