Chapter 7: Ethernet Connectivity Fault
By default, all interface ports are transparent to CFM messages (that is, they treat CFM messages as any
other message).
Use the procedures in this section to configure an MD, the MAs, the MEPs, the remote MEPs, the MIPs,
and global parameters for CFM.
Accessing the CFM tools
Use the procedure in this section to access the Ethernet CFM tools on the Avaya Secure Router
2330/4134.
Procedure steps
1. To access configuration mode, enter:
2. To access the Ethernet OAM tools to configure CFM, enter:
3. To configure CFM, enter:
4. To enable CFM globally, enter:
Table 10: Variable definitions
[no]
Configuring the number of path trace cache entries
Use the procedure in this section to specify the path trace cache entries in the database.
Configuration — Layer 2 Ethernet
Management configuration
configure terminal
oam
cfm
[no] enable
Variable
Value
Disables CFM globally.
July 2013
51