Ethernet Connectivity Fault Management
The levels separate MDs from each other and provide different areas of functionality to different
devices using the network. An MD is characterized by a level and an MD name (optional).
A single MD can contain several MAs. Each MA is defined by a set of Maintenance Points
(MP). An MP is a demarcation point on an interface that participates in CFM within an MD.
There are two types of MP:
• Maintenance End Point (MEP)
• Maintenance Intermediate Point (MIP)
The following figure shows the MD level assignments.
Figure 2: Maintenance Domain levels
Maintenance End Point
MEPs are points at the edge of the MD. They define a boundary and confine connectivity fault
management messages within this boundary.
22
Configuration — Layer 2 Ethernet
Comments? infodev@avaya.com
July 2013