File System Work Area Field Descriptions; Configuring Multiple Interface Ports Using Edm - Example 1 - Avaya ERS 3500 Series Fundamentals

Enterprise Device Manager procedures

File System work area field descriptions

The following table describes the tabs in the File System work area.
Tab
Config/Image/Diag file
Ascii Config File
Save Configuration
Configuring multiple interface ports using EDM - Example
1
Use this procedure as an example for configuring multiple interface ports using the Multiple
Port Configuration function and the Edit, Chassis, Ports, Interface work flow.
Before you begin
• Select ports on the Device Physical View.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree, click Ports.
4. Click the Interface tab.
5. To change the configuration of the selected ports, in the Multiple Port Configuration
6. In the Make Selection pane, click Apply Selection. The changes appear in the
42 Fundamentals of ERS 3500 Series
pane, double-click the cell beneath the column heading that represents the
parameter you want to change and do one of the following:
• Select a value from a drop-down list.
• Type a value in the cell.
table.
Comments? infodev@avaya.com
Description
Use this tab to view information about and
acquire image, configuration, and firmware
files.
Use this tab to acquire ASCII configuration
files.
Use this tab to save the current configuration
manually or automatically.
March 2014