Important Information About The Secure Router 4134; Compatible External Interface Modules For The Secure Router 4134 - Avaya Secure Router 4134 Installation Manual

Important information about the Secure Router 4134

You can mount multiple Secure Router 4134s in the same rack without an air gap between the
units, and you can intermingle them with other Avaya products or other vendor equipment.
Caution:
Cable bundles must not block the intake or exhaust vents of the Secure Router 4134.
Warning:
Do not install the Secure Router 4134 near a standing or running water source or in a high-
humidity environment. See
Other vendor equipment installed in the same rack can have a vertical space requirement for
heat dissipation and, if so, you must add those space requirements to the space requirements
for the Secure Router 4134.
For problem-free operation, locate the equipment rack in an area with sufficient clearance for
cabling and adequate ventilation.

Compatible external interface modules for the Secure Router 4134

The following optional interface modules are available for the Secure Router 4134:
• Small Modules:
- 1-port T1/E1 Small Module
- 2-port T1/E1 Small Module
- 2-port ISDN BRI ST Small Module
- 2-port ISDN BRI U Small Module
- 1-port Serial Small Module
- 2-port Serial Small Module
- 2-port FXS Small Module
- 4-port FXS Small Module
- 2-port FXO Small Module
- 4-port FXO Small Module
• Medium Modules:
- 1-port HSSI Medium Module
Installation — Chassis
Environmental requirements
Secure Router 4134 chassis
on page 49.
August 2013 27