Interface mode configuration
Adding all VLANs to a trunk link
Use the procedure in this section to add all VLANs to a trunk link.
Procedure steps
1. To access configuration mode, enter:
2. To select a WAN interface, enter:
3. To add all VLANs to the selected trunk link, enter:
Removing all VLANs from a trunk link
Use the procedure in this section to remove all VLANs from a trunk link.
Procedure steps
1. To access configuration mode, enter:
2. To select a WAN interface, enter:
3. To remove all VLANs from the selected trunk link, enter:
Adding a specified VLAN to a trunk link
Use the procedure in this section to selectively add VLANs to a trunk link.
Procedure steps
1. To access configuration mode, enter:
2. To select a WAN interface, enter:
3. To add a specific VLAN to the selected interface, enter:
90
Configuration — Layer 2 Ethernet
configure terminal
interface bundle <bundle-name>
switchport trunk allowed vlan all
configure terminal
interface bundle <bundle-name>
switchport trunk remove vlan all
configure terminal
interface bundle <bundle-name>
Comments? infodev@avaya.com
July 2013