Clearing Ethernet Cfm Information - Avaya 2330 Manual

Ethernet Connectivity Fault Management configuration
show cfm global-config

Clearing Ethernet CFM information

Use the procedure in this section to clear errors or stats related to CFM, or to clear the Linktrace
cache.
Procedure steps
1. To clear CCM errors logged to the Secure Router 2330/4134, enter:
2. To clear CFM MEP stats logged to the Secure Router 2330/4134, enter:
3. To clear CFM MIP stats logged to the Secure Router 2330/4134, enter:
4. To clear the path trace cache entries logged to the Secure Router 2330/4134, enter:
Table 32: Variable definitions
mep <mep id>
mip <mip id>
rmep <rmep id>
ma <WORD>
md <WORD>
mac-addr <mac addr>
session <session id>
76 Configuration — Layer 2 Ethernet
clear cfm errors [md <WORD>] [ma <WORD>] [mep <mep id>]
clear cfm mep-stats [mep <mep id> md <WORD> ma <WORD>]
clear cfm mip-stats [md <WORD> mip <mip id>]
clear cfm linktrace-cache [session <session id>] [mep <mep
id>] [rmep-id <rmep id>] [ma <WORD>] [md <WORD>] [mac-addr
<mac addr>]
Variable
Comments? infodev@avaya.com
Value
The numerical identifier for the local MEP.
Values are in the range from 1 to 8191.
The numerical identifier for the MIP. Values
are in the range from 1 to 8191.
The numerical identifier for the remote MEP.
Values are in the range from 1 to 8191.
The short name of the MA (up to eight
characters). For example
The short name of the MD (up to eight
characters). For example
The MAC address of the remote host. Enter
a MAC address in the form
aa:bb:cc:dd:ee:ff.
The linktrace test session ID. Values are in
the range 1 to 4294967295.
MA1 .
MD1
.
July 2013