Deleting Ipv4 Rules From An Interface; Example Of Configuring Vlan Classification Rules - Avaya 2330 Manual

Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To delete a protocol-based classification rule from the selected interface, enter:

Deleting IPv4 rules from an interface

Use the procedure in this section to delete an IPv4-based VLAN classification rule from an
interface.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
3. To delete a subnet-based classification rule from the selected interface, enter:

Example of configuring VLAN classification rules

In this example, you define both IPv4 and protocol VLAN classification rules and apply the
rules to already existing Ethernet, bundle, and LAG interfaces.
Procedure steps
1. To access configuration mode, enter:
2. Enter the configuration context:
3. To define rule 1 (subnet-based rule), enter:
4. To define rule 2 (subnet-based rule), enter:
Configuration — Layer 2 Ethernet
configure terminal
interface ethernet <slot/port>
no vlan classification protocol rule <id> vlan <vid>
configure terminal
interface ethernet <slot/port>
no vlan classification ipv4
configure terminal
vlan classification
rule 1 ipv4 10.10.0.0/16 vlan 3
Example of configuring VLAN classification rules
July 2013 125