Enabling CFM event messages
Use the procedure in this section to enable CFM-related event messages globally.
Procedure steps
1. To access configuration mode, enter:
2. To enable CFM-related event messages globally, enter:
Table 13: Variable definitions
[no]
priority <value>
Configuration — Layer 2 Ethernet
configure terminal
[no] system logging console enable [priority <value>]
Variable
Enabling CFM event messages
Value
no system logging console
Enter
enable
to disable CFM-related event
messages. The event messages are
enabled by default.
Specifies the console logging priority. The
default value is "critical". Values are the
following:
•
emerg
(emergency only)
•
alert
(alert and above)
•
crit
(critical and above)
•
err
(error and above)
•
warn
(warning and above)
•
notice
(notification and above)
•
info
(informational and above)
•
debug
(all messages)
•
none
(no messages)
July 2013
53