Ethernet Connectivity Fault Management configuration
Displaying information related to Maintenance Associations
Use the commands in this section to view information related to the configuration of MAs.
Procedure steps
1. To display summary information for all MAs within an MD, enter:
2. To display detailed information for a specific MA, enter:
Table 26: Variable definitions
ma <WORD>
md-name <WORD>
Displaying information related to MEPs and MIPs
Use the commands in this section to view information related to the configuration of MEPs,
remote MEPs, and MIPs.
Procedure steps
1. To display summary information for all MEPs (including remote MEPs) configured
2. To display summary information for a remote MEP configured within the specified
3. To display detailed information for a specific MEP, enter:
4. To display summary information for all MIPs configured in the Secure Router
5. To display detailed information for a specific MIP, enter:
72
Configuration — Layer 2 Ethernet
show cfm mas md <WORD>
show cfm ma <WORD> [md-name <WORD>]
Variable
within a specific MA and MD, enter:
show cfm meps ma <WORD> md <WORD>
MA (and MD), enter:
show cfm rmep <rmep id> ma <WORD> md <WORD>
show cfm mep <mep id> [ma <WORD>] [md <WORD>]
2330/4134, enter:
show cfm mips [md <WORD>]
show cfm mip <mip id> [md <WORD>]
Comments? infodev@avaya.com
Value
The short name of the MA (up to eight
characters). For example,
The short name of the MD (up to eight
characters). For example,
MA1
.
MD1
.
July 2013