Ethernet Connectivity Fault Management configuration
Procedure steps
1. To access configuration mode, enter:
2. To access the Ethernet OAM tools to configure CFM, enter:
3. To configure CFM, enter:
4. To specify the Linktrace cached entries, enter:
Table 11: Variable definitions
<cache size>
Configuring the CFM frame ethertype
Use the procedure in this section to configure the ethertype for CFM frames.
Procedure steps
1. To access configuration mode, enter:
2. To access the Ethernet OAM tools to configure CFM, enter:
3. To configure CFM, enter:
4. To specify the ethertype for CFM frames, enter:
Table 12: Variable definitions
<value>
52
Configuration — Layer 2 Ethernet
configure terminal
oam
cfm
linktrace <cache size>
Variable
configure terminal
oam
cfm
ethtype <value>
Variable
Comments? infodev@avaya.com
Value
The number of path trace cache entries in the
database. Enter a value in the range 1 to 200.
The default value is 100.
Value
The Ethernet type of the CFM frames. Valid
values are 88E6 and 8902. The default value
is 88E6.
July 2013