Example Of Binding A Bundle Access Interface To A Vlan - Avaya 2330 Manual

VLAN configuration
Procedure steps
1. To access configuration mode, enter:
2. To access the VLAN database, enter:
3. To create a VLAN with ID 2, enter:
4. To create a VLAN with ID 3, enter:
5. To create a VLAN with ID 4, enter:

Example of binding a bundle access interface to a VLAN

Procedure steps
1. To access configuration mode, enter:
2. To select a bundle (in this example, the bundle identified as T1IF), enter:
3. To link the bundle to an interface (in this example, the interface is port 1 of the
4. To configure the encapsulation, enter:
5. To configure the interface as an access port, enter:
6. To bind the bundle access interface to VLAN 2, enter:
118 Configuration — Layer 2 Ethernet
configure terminal
vlan database
vlan 2
vlan 3
vlan 4
configure terminal
interface bundle T1IF
module in slot 4), enter:
link t1 4/1
encapsulation ppp
switchport
switchport pvid 2
This changes the default PVID from 1 to 2.
Comments? infodev@avaya.com
July 2013