Associating Vlans With Hybrid Links - Avaya 2330 Manual

Associating VLANs with hybrid links

When configuring hybrid links, ensure that all frames transmitted by a bridge on a hybrid link
are tagged in the same way on that link. The frames must be either all tagged, or all tagged
and carrying the same VLAN ID.
A bridge can transmit a mix of VLAN-tagged frames and untagged frames, but the frames must
be for different VLANs. In the following figure, all the frames for VLAN A and VLAN B are tagged
on the hybrid link. All frames for VLAN C on the hybrid link are untagged.
Figure 14: Hybrid link network scenario
Adding all VLANs to a hybrid link
Use the procedure in this section to add all VLANs to a hybrid link.
Procedure steps
1. To access configuration mode, enter:
2. To select an interface, enter:
Configuration — Layer 2 Ethernet
switchport mode hybrid
configure terminal
Configuring a hybrid link on an Ethernet interface
July 2013 93