Chapter 16: Mac Entry Configuration; Adding Static Mac Address Entries To The Mac Address Table; Deleting A Static Mac Address Entry - Avaya 2330 Manual

Chapter 16: MAC entry configuration

Use the procedures in this section to configure static MAC entries.
Adding static MAC address entries to the MAC address
table
Use the procedure in this section to add a list of interfaces and associated MAC addresses to
the Layer 2 forwarding table.
Procedure steps
1. To access configuration mode, enter:
2. To add entries to the MAC address table, enter:
Table 54: Variable definitions
{forward | discard}
<interface>
<vid>

Deleting a static MAC address entry

Use the procedure in this section to remove a static MAC address entry from the MAC address
table.
Configuration — Layer 2 Ethernet
configure terminal
mac address <mac addr> {forward|discard} <interface> vlan
<vid>
Variable Value
Specify whether frames received with the
configured MAC address are to be discarded
or forwarded.
Specifies the interface on which the frame
enters the Avaya Secure Router 2330/4134.
For example, ethernet6/1.
Specifies the VLAN ID of the received
frames.
July 2013 135