Table of Contents
Advertisement
Table 11-8
General Data Errors, Machine Data Errors, Traversing Program Errors, continued
Cl.
No.
General data errors
4 (04) 131 (83)
Not possible to insert block
Cause
Effect
Elimina-
tion
4 (04) 132 (84)
Not possible to delete block
Cause
Effect
Elimina-
tion
Machine data errors
5 (05) 7 (07)
Measurement system
Cause
Effect
Elimina-
tion
5 (05) 8 (08)
Type of axis
Cause
Effect
Elimina-
tion
5 (05) 9 (09)
Rotary axis
Cause
Effect
Elimina-
tion
5 (05) 10 (0A)
Encoder type
Cause
Effect
Elimina-
tion
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Error Message,
Error Analysis and Elimination
Error response: "Warning" see Table 11-2
Memory full.
Function is not executed.
Delete unnecessary DBs and repeat function.
Block does not exist, no "assignment bit (bytes 2 and 3) enabled in
block (when data available).
Function is not executed.
Check program and repeat function with correct block number.
Error response: "Warning" see Table 11-2
The measurement system grid (MSR) entered does not agree with
the MSR in the other DBs of the module.
DB does not become effective and is stored non-retentively.
Check MSR and correct as necessary.
When making correct input, delete the other DBs on the mod-
ule before retransmitting.
No linear or rotary axis parameterized.
DB does not become effective and is stored non-retentively.
Correct and retransmit.
Impermissible value range or dependency violation
(see Section 5.3.1)
DB does not become effective and is stored non-retentively.
Correct and retransmit.
Unacceptable type of encoder.
DB does not become effective and is stored non-retentively.
Correct and retransmit.
Troubleshooting
Message/
Display
CBS
or
DB
DB
CBS
or
DB
CBS
or
DB
CBS
or
DB
DB
CBS
or
DB
CBS
or
DB
DB
11-27
Advertisement
Table of Contents
