Siemens SIMATIC FM 453 Manual page 91

Table 5-9 Menus of "Parameterize FM 453", continued
Menu Title or Entry
(With Single Command)
Tool offset data
Channel 1
Channel 2
Channel 3
Traversing program >
Channel 1
Channel 2
Channel 3
User data >
Channel 1...
Channel 2...
Channel 3...
Compress FM-RAM
Clear flash memory
Test
Startup >
Channel 1
Channel 2
Channel 3
Troubleshooting >
Channel 1
Channel 2
Channel 3
Service data >
Channel 1
Channel 2
Channel 3
View
Table form
Contents of column 5
>
Default values
Limits
Function bar
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Shortcut
> – Edits the tool offset data on the FM 453
–
–
–
– Edits the traversing programs on the FM 453
–
–
–
– Edits the user data on the CPU
–
–
–
– Compresses the FM 453 working memory. This is possible only if
the CPU is in STOP mode.
– Clears the FLASH memory on the FM 453
– Startup and troubleshooting
– Opens the startup window.
Module control and observation
–
–
–
– Opens the troubleshooting window.
Displays faults in the module
–
–
–
– Opens the window to look at servicing data
–
–
–
– Select different views and presentations
– Switches between dialog and table format (only with MD)
– Defines what appears in the last column (MD only)
– Displays default values (recommendations)
– Displays upper and lower limits
– Switches the function bar on/off
Defining Parameters of the FM 453
Significance
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
for channel 1
for channel 2
for channel 3
5-29